Die Lee Precision 7.62 Nagant 3-die 90921

DIE DE RECARGA MARCA LEE PRECISION
MODELO 90921  DIES 7.62 NAGANT
LA CAJA CONTIENE 3 DIES, 1 FULL LENGTH SIZING DIE( HACE FALTA LUBRICAR LA VAINA),1 BULLET SEATING DIE ( PARA PONER LA PUNTA ),1 FACTOTY CRIMP DIE ( PARA HACER UN CRIMP PERFECTO), 1 UNIVERSAL SHELL HOLDER, 1 CUCHARA DIPPER PARA COLOCAR POLVORA UN MANUAL DE INTRUCCIONES.
No Contiene hoja con datos de carga

We made a limited production run of 7.62 x 38mm Russian Nagant Revolver cartridge dies for Midway USA Documentation included with the dies came from them. We have no information or load data for this caliber other than they were originally loaded to about 850 feet per second and the original bullet diameter was .306”.

These dies have been adjusted to work with brass which has a wall thickness ranging from .010 to .012 thick. This means when resized the case will hold tight a .306” diameter bullet that has been pushed in flush with the mouth of a 38mm case, (1.496” long case).

Brass made in the U.S. for the .32-20 cartridge can also be used, but when the case wall is less than .008” thick the bullet may not be held tight in the case.

The case mouth is reduced in size by being squeezed down by the hole diameter in the die. The thicker the brass wall, the smaller the neck inside diameter.